Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
All-In-One Mini Q-Control Unit
#4
that was fast....I thought you were getting it from china via 'slow-boat'....

i just did a small graphic for you to see how I got it hookedup....  try it on the breadboard first....  let me know when you plan on trying it and I will send you some test files/instructions to get it working.

the graphic doesn't have fan control yet,  i'll put that in a separate pic....  the fan control mosfet is a tough choice as not many can drive many mA with a 3.3v logic.  the one I used IRL44N should work up to 400-500ma but I don't use a fan in the allinone so if you could test it out with other mosfets that would be great.  You can connect the fan to 5v (usb power) and use pin 3 on the promini to the mosfet for control.   Make sure you use a diode on the fan connection if you plan on trying the fan, and a small resistor to group for the mosfet..

Here's the photo[Image: allinone_sch.png]
Reply


Messages In This Thread
All-In-One Mini Q-Control Unit - by NailBuster - 12-14-2016, 05:28 PM
RE: All-In-One Mini Q-Control Unit - by wbegg - 12-17-2016, 11:23 AM
RE: All-In-One Mini Q-Control Unit - by JohnW - 03-22-2017, 07:22 PM
RE: All-In-One Mini Q-Control Unit - by NailBuster - 12-17-2016, 11:14 PM
RE: All-In-One Mini Q-Control Unit - by JeremyM - 02-16-2017, 04:54 AM
RE: All-In-One Mini Q-Control Unit - by JeremyM - 02-16-2017, 09:04 PM
RE: All-In-One Mini Q-Control Unit - by JohnW - 03-22-2017, 11:29 PM
RE: All-In-One Mini Q-Control Unit - by JohnW - 03-23-2017, 11:52 PM
RE: All-In-One Mini Q-Control Unit - by JohnW - 03-23-2017, 10:39 PM
RE: All-In-One Mini Q-Control Unit - by JohnW - 03-24-2017, 02:54 AM
RE: All-In-One Mini Q-Control Unit - by JohnW - 03-25-2017, 02:43 AM
RE: All-In-One Mini Q-Control Unit - by JohnW - 03-25-2017, 01:20 PM
RE: All-In-One Mini Q-Control Unit - by JohnW - 03-27-2017, 05:30 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)